SMPS Battery charger -12V/24V/36V/48V – 120W

Technical Specifications

S.no Parameter BC1210 BC2405 BC3603 BC4803
1 Supply Voltage 230V ( ±15% )
2 Frequency range 50/60 Hz( ±10% )
3 Power Consumption 120W 120W 108W 144W
4 Battery voltage nominal 12V 24V 36V 48V
5 Charging voltage 13.6V 27.2V 40.8V 54.4V
6 Charge current max  (± 5%) 10A 5A 3A 3A
7 Protections
7.1 Mains Under & Over Voltage Charger cut off <180VAC & >260VAC
7.2 High temperature Charger being at too high Temperature
7.3 Reverse Polarity Protection Against wrong connection of plus and minus battery terminals
7.4 Short Circuit Output short-circuit protection with auto restart
8 Indicators (LED) Power ON, Battery charging, Battery fully charged.
9 Operating temperature -10°C to +50°C
10 Storage temperature -20°C to +70°C
11 Cooling Natural air cooled
12 Input Output Isolation > 100Mohm at 500VDC
13 Dielectric withstand input to output 1000VDC for 1 minute
14 Relative humidity 10 to 90% condense free
15 Protection level IP20
16 Mechanical Specifications
16.1 Dimensions 100mm Width X 200mm Height X 60mm Depth
16.2 Weight 0.75 Kgs max
16.3 Enclosure Metallic enclosure with epoxy powder coating
17 Cords and Connectors Length – 1.5 mtrs, 3 Conductors, Plug – 5A 250V 3pin, type- BS546
18 Battery Cable Length – 2 mtrs, 30 A Battery clips

Comments are closed.