Battery charger – 12/24/36/48V – 300W

Technical Specifications

S.no Parameter BC1225 BC2415 BC4807
1 Supply Voltage 230V ( ±15% )
2 Frequency range 50 0r 60 Hz( ±10% )
3 Power Consumption 300W 360W 336W
4 Battery voltage nominal 12V 24V 48V
5 Charging voltage 13.6V 27.2V 40.8V
6 Charge current max  (± 5%) 25A 15A 7A
7 Protections
7.1 Mains Under & Over Voltage Charger cutoff <180VAC & >260VAC
7.2 Battery Over Voltage >14V >26V >50V
7.3 High temperature Charger being at too high Temperature
7.4 Reverse Polarity Protection Against wrong connection of plus and minus battery terminals
7.5 Short Circuit Output short-circuit protection with auto restart
8 Indicators (LED) Power ON, Battery charging, Battery fully charged.
9 Operating temperature -10°C to +50°C
10 Storage temperature -20°C to +70°C
11 Cooling Natural air cooled
12 Input Output Isolation > 100Mohm at 500VDC
13 Dielectric withstand input to output 1000VDC for 1 minute
14 Relative humidity 10 to 90% condense free
15 Protection level IP20
16 Mechanical Specifications
16.1 Dimensions 220mm Width X305mm Height X105mm Depth
16.2 Weight 3.5Kg.Max
16.3 Enclosure Plastic or Metallic enclosure with epoxy powder coating
17 Cords and Connectors Length – 1.5 mtrs, 3 Conductors, Plug – 5A 250V 3pin, type- BS546
18 Battery Cable Length – 2 mtrs, 30 A Battery clips

Comments are closed.